Stage lighting control skills

First: In the stage lighting or studio lighting control of the auditorium, if the lighting controllers suddenly turn on the lights when the bulbs are cold, it is likely to cause the bulbs to burst with a "pop" sound; or cause the tungsten filaments of the bulbs to fuse.

Faced with this problem, the control skills that our stage lighting controllers should master is to push the fader of the console only a little when the bulb is in a cold state (before the opening) (often called the calendering state). , make the bulb slightly bright, let it be in a preheating state, make it heated evenly, and evaporate the water molecules condensed on the glass shell of the bulb, after preheating for a few minutes, turn it on a little brighter, and after preheating for a few minutes, Only then can the light be fully turned on.

Second: Lighting controllers should remember not to turn on the power of the silicon box when the faders of the dimmer are fully pushed

If the controllers operate illegally, the result is still the failure in the first problem above.

Third: The stage lighting controllers remember not to reverse the order of the lighting console and the power supply of the silicon box when switching the equipment.

It is normal for equipment to be damaged by incorrect operation sequence, which should be very clear to those who understand control technology.

Fourth: When operating and controlling lighting equipment, do not shake the lamp with large movements when the light bulb is turned on.

This problem is rare, and lighting controllers are relatively clear, so we won't talk about it more.

Fifth: Do not touch the light bulb directly with your hands when replacing the light bulb, which will affect the smoothness of the light bulb, and another hidden hazard is the bursting of the light bulb. In this step, the operation technique we use is to replace the light bulb. Always wear gloves before touching the bulb. If you don't have gloves, wrap the bulb with sponge, plastic wrap, or a soft tissue before installing it. Be sure to remove these wraps after installation to avoid a fire when the bulb is turned on.

Sixth: Do not forget to install the protective net cover when the color changer is installed. The protective net cover is to prevent splashing and hurting people and burning items when the light bulb explodes.

The quality of VanGaa products has passed through layers of customs, and it is not within the scope of care.Here you can choose all the products about stage lights, video lights, let you experience the best service we give.If you have any questions, feel free to contact us.